Jantex PRO Discharge Base is a garment dye stripping system.  The Jantex PRO Discharge Base can be used "as is" to achieve a neutral ground color or concentrated waterbase pigments may be added to the PRO Discharge Base to simultaneously strip and replace the color in one print.  When ready to print, add Jantex Parolite (activator) at 6% by weight and mix well. 

Do not prepare more than needed as the discharge base has a shelf life of approximately 8 hours after activation.
Each substrate will react to discharge differently and some garments do not discharge.  Please check with your garment supplier and test thoroughly before running any production.